①It should be able to ensure the accuracy and precision of the workpiece being processed.
Nowadays, many workshops actually still use hand-operated machine tools, but the factory next door uses CNC. Their output in one day is enough for you to work for a week. CNC machining is not just a concept mentioned in words, it is there. It directly determines the threshold level of the machining industry, the accuracy of the parts, and how much it will cost in the end.
G code is the real protagonist
CNC machining is entirely driven by G code. It is this set of instructions that will tell the tool in the machine tool which Cartesian coordinates to move, what the feed speed should be set to, how many spindle speeds should be used for CNC processing , and when the coolant should be turned on. After the worker wrote the gesture, the machine tool ran away by itself, without having to look at the handwheel at all.
When writing G code, you need to follow a very fixed set of rules. G00 is used for rapid positioning operations, G01 is used to walk out of a straight trajectory, and G02 and G03 are used to cut different arc paths.
For processing a medium-complexity part, the program often requires hundreds of lines of instructions to complete. If just one letter is wrongly arranged in the order of these instructions, the entire piece of material will be completely scrapped.
Accuracy and repeatability are hard indicators
Traditional manual work relies heavily on the master's personal feel for CNC machining . Therefore, if the operator is changed in the same production process, the size of the part is likely to deviate by approximately 0.05 millimeters.
When using CNC equipment for processing, its accuracy can be strictly controlled within 0.01 percent, which makes the dimensions and specifications of a thousand parts produced in succession almost completely consistent. Therefore, sampling inspection can be used to ensure quality in subsequent quality inspection links.

For parts that require extremely small tolerances, such as automobile cylinder blocks and aircraft turbine blades, it is impossible to manufacture them without CNC technology. And because it has good repeatability, there is no need to inspect each piece one by one during mass production. This saves enough time to plan the production plan for the furnace.
Type complex shapes directly
The five-axis CNC milling machine has the linkage capability of five axes. For the processing of curved surfaces, special-shaped cavities and spiral grooves, it can be completed in one clamping. If manual processing is used to process such structures, the staff will basically have no choice but to give up, or they will need to perform multiple splicing processes to barely complete it.
For titanium alloy bone placement components used in medical equipment, their appearance presents a large number of curved surfaces. Machining on a CNC machine often takes an entire night. The processed products enter the assembly line the next day. Compared with manual production, the operation cycle of this production method is shortened to one-third of the original level. At the same time, the defective rate of products has also dropped significantly.
The three most common types of CNC in workshops
In the current field of CNC machining, people will use CNC turning methods to process tube and shaft parts. At the same time, they will also use CNC milling technology to deal with tube blocks and plate workpieces. In addition, they will also use EDM wire cutting to challenge those very hard materials and narrow gaps that need to be cut.
In most machining workshops, these three process methods are standard items, and the specific production work will be reasonably divided according to the specific type of order placed by the customer.
Judging from the data of the domestic machining industry in 2024, the situation is as follows. CNC milling is the largest part, accounting for about 55%, CNC lathes account for 30%, and wire cutting accounts for 15%. Some small factories often only have CNC milling equipment, and those larger factories will also have all CNC lathes and wire cutting equipment.
Cost accounts must be calculated clearly
The floor price of a three-axis machining center is usually in the range of 300,000 yuan to 800,000 yuan, which seems to be relatively expensive at first glance. However, the monthly salary of a skilled lathe is about 7,000 to 8,000 yuan, and a two-shift work system is implemented a day. The equipment is operated for twelve hours a day. In just three months, the difference in labor costs has been completely evened out.
The key lies in the utilization rate of this equipment. If this machine tool can run for 300 days a year and maintain 16 hours of working time every day, then we can reduce the production cost of a single product to one-tenth of that of manual processing.
But then again, if the device cannot run for these hours, then it is essentially a huge iron object that just takes up space and has no practical use.
Promotion status and actual pitfalls
Time has arrived after 2225 years. ① It should be possible to ensure the accuracy and accuracy of the workpieces being processed. The CNC rate of domestic machining enterprises above designated size has already exceeded the level of 70%. However, some small workshops and repair shops still use the hand-crank method to operate.
This thing really doesn't mean that I don't want to replace it with new equipment. The reason why we continue to use hand cranks is because the quantity of single pieces they handle is too small. If you need to open a mold, you won't be able to get your money back at all.
There is another problem, that is, there is a gap in programming talents. The number of people who can write complex G code is indeed in the process of decreasing. Many factories now choose to outsource all program development work to third-party personnel to handle this matter. The result is that the core process technology is directly in the hands of others. Once you need to change suppliers later, you will become very passive and embarrassed.
What kind of value can the utilization level of CNC machine tool equipment in the workshop you are currently in reach? You are welcome to discuss this matter in the comment area below. If you think such content is valuable, give it a like and forward it to your peers to take a look.












No comments yet