Precision And Special Machining Thesis Wire Electric Discharge Cutting Processing

Precision and Special Machining Thesis Wire Electric Discharge Cutting Processing

Many engineering students often confuse the wire cutting process with the electric discharge machining process, so that they think that the two are actually the same thing. In fact, there are obvious differences between them at the principle level, equipment construction level, and practical applicable scenarios. If the two are confused together during the writing process of related papers, it will definitely lead to a direct loss of points.

What exactly does wire cutting rely on to cut metal?

The principle is that discharge ablation is not knife cutting.

Wire cutting uses a molybdenum wire or copper wire as an electrode. A pulse voltage is applied between the workpiece and the wire . The difference between wire cutting and EDM is that the spark discharge burns the metal bit by bit. The wire discharges while moving, and the workpiece moves in the XY direction to cut various contours. There is no cutting force in the whole process . Hard materials above HRC60 can still be cut.

Equipment consumables are the core difference

In Liaoning University of Science and Technology, fast-travel wire cutting machines are often used in the laboratory because it cuts wires very quickly and consumes very cheap materials. As for the accuracy of the slow wire machine, it can reach a level of plus 0.005 millimeters, so many mold factories in the three northeastern provinces still continue to use this equipment.

For working fluids, distilled water or emulsion is generally used as the medium. Their main function is to have an insulating effect and also have a scouring effect.

What is the difference between EDM and wire cutting?

Electrode shape determines processing logic

The EDM technique uses a copper electrode that has the same shape as the workpiece cavity. It relies on the process of discharge to copy this shape to the workpiece identically.

Wire cutting processing does not need to be so complicated. Wire cutting only uses one wire. Theoretically, it can cut any shape of plane contour. The biggest advantage of this method is that it does not require special production of electrodes at all. This is the most fundamental difference between the two.

The scope of application is completely different

线切割加工与电火花加工区别_精密与特种加工技术_电火花线切割加工技术

EDM is a processing method that is more suitable for processing deep cavities and particularly complex shapes, such as parts such as concave molds in injection molds. Wire cutting is different. Wire cutting is better at cutting thinner plates, narrower gaps, and steel parts that have hardened after quenching. These two technologies are often used in conjunction with each other in the field of precision machining. However, it should be noted that when writing a paper, you must not write these two things as the same process, because they are essentially different.

High-pressure water jet is another technical route

Paper on precision and special machining without electricity or heat, wire EDM processing, purely relying on water pressure

Pressurize the water to more than 4000 MPa, and then let the water flow out through the gem nozzle, and its speed can reach supersonic speed. When cutting those very hard materials, garnet abrasive is added, so that it becomes a mixed jet of water and abrasive. This method of working purely by mechanical impact can prevent the workpiece from deforming and will not produce a heat-affected zone.

The equipment is large but can cut thick plates

The weight of a waterjet mainframe can reach dozens of tons, and it occupies an area of ​​more than ten square meters. The advantage it has is that it can cut steel plates with a thickness of two hundred millimeters, it can also cut granite, and it can also handle situations such as carbon fiber composite materials.

Places like Dalian Shipyard often use this equipment for blanking operations in their daily work. The cross-sections it cuts are neater than flame cutting, which saves the subsequent grinding process.

How to choose among the three processes?

Look at the material hardness and thickness

When the material hardness exceeds HRC60 and the part thickness is within 200 mm, wire cutting processing technology should be preferred. If there is a deep cavity structure and the shape is complex, the EDM process should be chosen.

When dealing with glass materials, ceramic products or composite materials, or because low-temperature cutting operations are required, it is time to use high-pressure water jet processing, because once the wrong processing technology is selected, it will be a waste of money.

Look at accuracy and economy

The accuracy of wire cutting is plus or minus 0.02 millimeters. Its processing fee is calculated based on meters, and the price is usually tens of dollars. The EDM process is charged based on working hours. If the parts being processed have deep cavities, the cost will be more expensive.

Water jet processing is charged based on area, which is more cost-effective when cutting thick plates. Therefore, before placing an order, enterprises must obtain quotations from these three methods and then compare them.

线切割加工与电火花加工区别_精密与特种加工技术_电火花线切割加工技术

Real cases in Liaoning manufacturing industry

Applications of Benxi Steel and Shengu Group

The Benxi Iron and Steel Plate Factory uses high-pressure water jets to cut silicon steel plates. There is no heat-affected zone in this section, so the weld can be directly judged as qualified. Shengu Group uses the wire cutting method to arrange the blanking process in the processing of precision instrument casings. This material is thirty-one and sixteen kinds of L stainless steel. It has a thickness of eight millimeters. It can complete the cutting in one go and directly enter the assembly stage. During the writing process of the course report, These specific practical application cases are frequently cited.

Small batch mold factories rely on wire cutting to make a living

There are some small mold factories in Shenyang and Dalian, and the orders they receive are often just a few dozen sets of injection molds. The cavity part is processed using the EDM process, while the guide posts and guide sleeves are processed using wire cutting technology. These two processes work together to compress the production cycle from the original two weeks to five days. As long as workers can adjust the parameters of these equipment, they can do their jobs competently. There is no need to master the operating skills of lathes and milling machines.

Which direction will we go in the future?

Five-axis linkage plus intelligent compensation

Wire cutting machines are now adding supporting functions of fifth and sixth axes, which have the ability to cut curved surfaces in space. AI can compensate the movement trajectory of the tool in real time based on the wear and tear of the copper wire diameter, so its processing accuracy can be improved to a higher level than manual adjustment.

Domestic head equipment manufacturers have achieved mass production of five-axis wire cutting machines by 2025, and their prices have dropped from 800,000 yuan to 450,000 yuan.

Ultra-high pressure and nanoabrasives

The nozzle pressure was increased to 6,000 MPa and the abrasive particle size was reduced to 200 nanometers, with the goal of ensuring no damage to the carbon fiber and titanium alloy. The research team of Dalian University of Technology published relevant papers in 2024. In a laboratory environment, it has been able to achieve a roughness value of Ra0.8 on the cut surface, which is very close to the goal of mass production.

When the action in your hand at the current moment is to obtain quotations corresponding to three different processes at the same time, what method will you use to judge which plan is the most cost-effective from an economic perspective?

We very much welcome you to come to the comment area to talk about specific cases you have encountered in actual work. If your answer is found to be useful, please click like it and share the news with your classmates in the same professional field.

© Copyright Notice
THE END
喜欢就支持一下吧
Likes8 Share
评论 Be the First to Comment

Please log in to comment

    No comments yet