Zhongyilong Hardware丨What Environmental Requirements Should Be Met During Sheet Metal Processing?

Zhongyilong Hardware丨What environmental requirements should be met during sheet metal processing?

Many sheet metal factories perform very frequent equipment maintenance, but their workshop environment has become very bad. The specific manifestations are that the temperature is not controlled and dust is flying everywhere. As a result, the accuracy of the equipment will still deviate. If the environmental problems are not solved, then all maintenance work will be in vain.

钣金加工设备维护保养_保养加工维护钣金设备有哪些_钣金加工常用工具和设备

The space layout does not leave enough room for equipment transportation

The area of ​​the workshop must be large enough, and equipment such as laser cutting machines, punches, and bending machines must be placed in place. The raw material area and finished product storage area must also be set up for maintenance and maintenance of sheet metal processing equipment . The width of the aisle must be at least 1.5 meters. Only in this way can the forklift pass smoothly and the workers can turn around and operate inside.

The layout is arranged according to the production process, and the processes of blanking, punching, bending and welding are separated in sequence. After a factory in Suzhou was re-planned in 2024, the transportation distance was shortened by about 40%, and the situation of scratches caused by collisions between equipment has completely disappeared.

Temperature and humidity are not controlled, the board size will directly deviate

钣金加工设备维护保养_保养加工维护钣金设备有哪些_钣金加工常用工具和设备

The temperature should be controlled between 15 degrees and 25 degrees. If the temperature is too hot, the steel will expand due to thermal expansion and contraction. In this way, the positioning may be deviated by 0.05 mm during laser cutting, resulting in misalignment of the panels. The humidity should also be kept within the range of 45% to 85%RH. If the humidity is too low, static electricity will attract debris everywhere. If the humidity is too high, the plates in the plate storage area will directly rust.

In the summer of 2023, there was a local factory in Dongguan that specialized in manufacturing chassis casings. During that period, the humidity in the workshop had been maintained at more than 90% all year round. Sheet metal processing equipment maintenance , the rework rate caused by the oxidation of the aluminum plate rose directly from the original 3% to 11%. The loss of material alone cost nearly 80,000 yuan in one month.

Ventilation and lighting cannot keep up with the work, workers are worried

Smoke and ozone will be generated during laser cutting and welding operations. Industrial exhaust fans must be installed and equipped with filtration systems. The number of air changes per hour must not be less than 6 times. Otherwise, workers will feel dizzy and nauseated after two hours of work and will be unable to continue working.

The lighting brightness must reach a standard of at least 500 lux. There must be no shadows in the area below the workstation. When operating the punching and shearing die, if the fingers are slightly deviated from the correct position, an accident may occur. Therefore, the lamps should be inspected and replaced every quarter. Never wait until the lights dim before considering these things.

If noise is not controlled, equipment vibration accuracy will be lost.

The noise level of punching equipment and shearing machine equipment can break through the numerical limit of one hundred decibels without any pressure. Regarding the sound insulation and sound-absorbing treatment of the four walls, corresponding sound insulation and sound-absorbing panels can be installed. For the equipment base, rubber material vibration pads can be added. This is to avoid high-frequency vibration transmission behavior, which will be transmitted to the nearby precision bending machine, thereby causing the accuracy of the precision bending machine to be eliminated by vibration.

In 2025, in a sheet metal workshop in Shanghai, due to the addition of sound insulation equipment and facilities, the vibration amplitude of the bending machine was reduced by about 60%. Customer complaints caused by vibration-induced lines on the product surface were almost completely eliminated, and the number of returns from customers was also reduced by more than half.

钣金加工常用工具和设备_钣金加工设备维护保养_保养加工维护钣金设备有哪些

The surface of the board is completely ruined due to oil stains and dust.

The oil around the equipment should be wiped clean every day and cannot be left there. Floors must be cleaned at least twice a week. If there are too many particles suspended in the air, they will adhere directly to the surface of the sheet metal parts. This will cause subsequent spraying operations to malfunction and many small potholes to appear on the surface. When customers conduct acceptance inspection, if they find quality problems, they will directly return the product and reject it.

The scraps and garbage must be put together and piled up, but they must not be scattered in the aisles. If a forklift is pressed down, the board will be deformed, and then the entire batch of goods will have to be scrapped. The monthly loss must be several thousand yuan, so don't think it is a troublesome thing.

If protection and fire protection are not in place, everything will be in vain.

Workers must wear anti-smash safety shoes and goggles. When operating the punch press, you must wear anti-cut gloves. This matter is not done just by going through the motions. A fire extinguisher must be provided within five meters of each work station. Fire hydrants need to be pressure tested every six months.

An evacuation drill must be organized every quarter. Among the fire incidents in the sheet metal industry across the country in 2024, 70% of fire incidents will be due to fire escapes being blocked by materials, so the access must be kept open at all times. Do not wait until the fire has started before starting to find a way out.

Regarding the temperature, humidity, and ventilation effect in the factory where you are located, are these two items currently considered qualified or not? You are welcome to discuss and exchange it in the comment area. If you think this information is useful, please give it a like, and then forward it to your colleagues for a look if it is convenient.

© Copyright Notice
THE END
喜欢就支持一下吧
Likes8 Share
评论 Be the First to Comment

Please log in to comment

    No comments yet