What should I do if my car's paint peels off and exposes the metal? Teach you step-by-step to save money on repairs and say goodbye to hidden dangers of rust
Once the car paint peels off and the iron sheet is exposed, most people will think that it doesn't matter much. But in reality, metal begins to corrode within twenty-four hours. If it is delayed for about a week, it is very likely that the iron sheet will be rusted through. Don't wait until small scratches turn into big holes before you regret it.
Rust breaks through faster than you think
After the metal is exposed, rain, moisture and acid rain will directly attack the iron sheet. In winter, the snow melting agent spread on the road for snow removal contains a large amount of chloride, which doubles the corrosion rate of the material. The specific value may be several times higher.
The tinplate itself is not equipped with any anti-rust coating. Once the paint film on the surface is damaged, the rust will continue to spread around the breach to the surrounding areas.
I once saw a driver who was engaged in online ride-hailing driving. He ignored the paint peeling off the bumper. After three weeks, the corrosion of the iron part penetrated a hole the size of a coin. The subsequent repair process cost nearly 2,000 yuan. If he had invested 30 yuan for a simple repair operation, the original problem could have been avoided.
Sanding is the critical first step in restoration
First take 2000 grit water sandpaper, dip it in water, and then lightly sand it. The specific operation targets are scratches and a surrounding radius of 2 cm.

What must be emphasized here is that the force should be light. The core goal is just to remove the burrs and floating rust on the surface. Be sure to avoid leaving deep potholes due to excessive force. When choosing the coverage area for polishing, it is better to choose a smaller area than a larger area, because if the area is too large, it will expand the overall area that needs to be repaired.
After wiping the surface clean with a damp cloth, make sure that the debris left by the sandpaper has been removed. Suppose that a small area of rust spots has appeared on this piece of iron sheet, then you need to change to a 320-grit sandpaper to continue polishing. It needs to be sanded for a while to completely remove those rust spots, and then proceed to the next step.
Don’t spray the touch-up pen too thickly at one time
Before using the touch-up pen, you need to shake the pen evenly, then aim the pen nozzle at the car body, and maintain a distance of about 15 cm to perform a horizontal sweeping spray operation. Never spray at a fixed point. It is recommended to spray 3 to 4 layers and wait 10 minutes between each layer to allow the bottom layer to dry completely. If you use thin spraying and multiple passes, the effect will definitely be much better than the thick spraying method.
Wait another 24 hours before touching the final coat, as it takes about 48 hours to completely dry in this state. It is prohibited to wash the car during this period, and it must not be exposed to rain, otherwise the paint film will be easily washed away because it has not completed the curing process.
Real repair record for 30 yuan
A netizen, whose online name is "Little White Car Owner", once shared an experience about the location of the trunk bumper of a car. A piece of paint was scratched off, exposing the tinplate inside. He spent 30 yuan to buy a touch-up pen of the same color, and then followed the steps. When he checked the next day, he found that the color difference of the car body was basically invisible. This way, he saved the cost of going to a professional spray shop for spray painting. That cost several hundred dollars more.
Of course, tools like touch-up pens are suitable for small, shallow scratches. If the area exceeds five centimeters, or the paint surface has peeled and lifted, you still have to find a professional master to do partial spray painting. If you spray it by hand, the effect will be very poor.
If the rust is worn out, it can only be repaired by riveting and welding.

The situation is like this. Once the iron sheet is corroded and a hole is formed on the car, the paint peels off and the iron sheet is exposed. What should I do? We will teach you step-by-step to save money on repairs and say goodbye to the hidden danger of rust. That is, after the rust is worn out, the touch-up pen will really no longer be able to function. You have to dig out the area that has been penetrated by rust, then cut out a new piece of iron sheet with exactly the same size and specifications, and then fix it with rivets and spot welding. This process is called digging and riveting welding in professional terms.
It should be noted that the thickness of tinplate is very thin, so when performing these operations, your hands must be very steady, and you must not accidentally scratch the area next to it.
After the riveting and welding work is completed, the surface must be polished extremely smooth, and then putty is scraped to fill the welds flat. Then the primer must be sprayed, and finally the topcoat must be sprayed.
If you do this step yourself, it will be quite difficult. We recommend that you find a professional sheet metal master to handle it. The cost of man-hours required is generally only about two to three hundred yuan. Compared with the consequences of leaving the problem alone, this cost is much cheaper.
Don't let small rust spots turn into big holes
In the final analysis, this car's paint repair is a race against time. If you deal with it immediately the day the paint peels off, it may only take ten minutes to get it done; if you delay it for a month, you may have to spend hundreds of dollars on sheet metal spray painting. Every rust stain that appears is the car's reminder to you that you should take care of it.
Whether you choose to DIY it yourself or leave it to a master, there is only one word left at the core: fast. Your car is on the road with you every day, so you deserve the best care before the worst happens.
Does your current car have scratches on the body that expose the iron? You can talk about this in the comment section. Please give this message a like and pass it on to the car owners and friends around you. Don't wait until the rust on the car body has completely worn out the iron sheet before you feel anxious and nervous.












No comments yet