Safety operating procedures for grinder operators
Once an accident occurs with a grinder, it basically starts with serious injuries. But the root cause of 80% of the accidents is stuck in the words "to save trouble." Here are six rules. This piece of work was earned by the master craftsmen in the workshop through bloody lessons. If you dare to touch these things, something will really happen.
Safety responsibility falls on everyone
In 2024, an accident occurred in a machine processing factory in a certain place. There was a worker on a grinder. She did not perform safe operations in accordance with the regulations. As a result, the rotating grinding wheel fragments suddenly exploded and flew out, directly injuring her colleagues at the work station next to her. When the responsibility was investigated, the operator and the team leader each received a fine. In addition, even the director of the workshop was given a fault record, which fully illustrates that the rules and regulations of safety management are not just beautiful slogans posted on the wall for anyone to see, but are indeed a very heavy reality that weighs on everyone's head like a boulder.
The rotation speed of the grinding wheel can reach several thousand revolutions per minute. If an accident occurs, it will definitely not be as simple as a skin injury. Therefore, an assessment on safety practices must be conducted every quarter. You must not find this annoying. If the day of the accident really comes, you will find that the records you verified and the name you signed are all key things that can save your life.
Goggles and gloves must not be removed during the entire process
The writing regulations are very rigid, requiring that protective glasses and anti-cutting gloves must be worn from the time the machine is started to the time it is shut down, and they are not allowed to be taken off in between. In 2023, monitoring records from a grinding machine factory in Jiangsu showed that an operator took off his gloves to wipe the table. At this time, a fragment of the grinding wheel directly cut open his forearm, resulting in eleven stitches and two months of rest.
Some people feel that wearing glasses will make them feel stuffy, or that wearing gloves will affect the feel of the operation. However, it is important to understand that the temperature of sparks flying during the grinding process can reach more than 100 degrees. When choosing gloves, you should choose types with a relatively high level of anti-cutting. You must not choose unsuitable products just for the sake of cheap prices. In fact, it only costs a few dozen yuan more a year.
Check the system three minutes before turning on the computer.
Before officially starting to operate the equipment in each shift, be sure to spend three minutes inspecting it. It is necessary to carefully check whether there are cracks on the surface of the grinding wheel. It is necessary to confirm whether the chuck part is firmly fixed. Also check whether the installation of the protective cover is firm and reliable. The incident occurred within a company in Zhejiang in 2025.
At that time, the operator wanted to draw quickly, so he omitted the inspection step and started the machine directly. Because there was an old crack on the grinding wheel that was not discovered in time. When the machine started running at high speed, the grinding wheel exploded. The huge impact caused the entire protective shield to fly out.
You should report the hidden dangers discovered on the spot to the team leader. You should never use a wrench to tighten it yourself. If non-professionals tamper with these components such as spindle bearings and coolant pipelines, the final result will be to drag what was originally a minor problem into a more serious failure. Such wrongdoing can even result in physical harm to yourself.
Do not pile clutter within one meter of the countertop
Clean all the oilcloth, iron scraps and empty oil barrels within one meter around the grinder. In a workshop in Chongqing in 2024, when an operator bent down to pick up a workpiece, he stepped on a broken grinding wheel and threw himself onto the rotating grinding wheel. Fortunately, his face was not hurt, but a layer of skin was still rubbed off his forearm.
After you use the tool, you need to hang it back on the tool board and make a small mark. Keep the countertop clean when you're cleaning it, so you won't panic when you come looking for something. If you panic, your hands will shake, and danger will follow.
Don’t adjust grinding parameters based on feel
The feed amount, rotation speed, and coolant concentration must all be strictly implemented in accordance with the regulations on the process card. When it comes to grinding machine operation, these five words "almost enough" are the most important.

Looking back on what happened in a certain Guangdong factory in 2025, a new employee adjusted the feed speed to twice the original speed in order to catch up with the work progress. As a result, the grinding wheel was overloaded, and the sparks generated ignited the lubricating oil placed nearby, almost causing a fire accident.
The concentration of the coolant is usually controlled within a range of 8% to 12%. If the concentration is too low, the temperature in the grinding area will rise very high, causing the workpiece to be easily deformed or cracked. Therefore, it is recommended that you use a refractometer to measure the concentration once a month. Do not blindly judge the concentration of the coolant just by smelling it through your nose.
The handover must be signed
When handing over the shift, the amount of wear of the grinding wheel, whether the coolant level is high, and whether there is any abnormal vibration of the machine tool should all be clearly written in the record book, and both people on and off work should sign their names to confirm this fact.
In retrospect, a serious incident occurred in a grinding machine workshop somewhere in Shandong in 2023. The workers on the day shift did not clearly remember the important information that the grinding wheel was about to reach the critical thickness. As a result, when the workers on the night shift started running the machine, they directly wore the grinding wheel through. This action almost caused the machine bed to be damaged, and in the end the entire precious industrial machine tool had to be scrapped.
Saying "no problem" verbally does not count, only words in black and white do. When an accident occurs, checking the records and signing them is a hundred times more effective than remembering them at the time.
Have you ever been engaged in work related to grinding machines? In your past experience, is there a certain standard that you thought was too true, but it was proved to be life-saving at a critical moment? Everyone is welcome to share relevant opinions and experiences in the comment area. If you think these contents have practical value, please give it a like and forward it to your peers.












No comments yet