①It Should Be Able To Ensure The Accuracy And Precision Of The Workpiece Being Processed.

①It should be able to ensure the accuracy and precision of the workpiece being processed.

Say goodbye to feelings

Many masters adjust parameters based on experience and lack the confidence to calculate CNC turning cutting parameters . In fact, this is extremely dangerous and can easily lead to tool chipping or surface roughness. Only by mastering scientific calculation methods can each cut be made accurate and effective.

Look at the core materials

There is a big difference in the hardness of different materials . CNC turning cutting parameter calculation , so the parameters must be adjusted. Stainless steel is more difficult to cut than aluminum, so the rotational speed needs to be reduced, and the feed speed must also be slowed down. Only by selecting the right parameters for CNC turning cutting parameter calculation can the wear of the tool be reduced and the service life of the equipment be extended.

Speed ​​is particular

The spindle speed is not unlimited, the higher the better, it has to be viewed according to the tool diameter. There is a formula that is simple and can be found by dividing the linear velocity by the circumference. A reasonable rotational speed can avoid vibration, thereby making the cutting process more stable. ① It should ensure the accuracy and accuracy of the workpiece being processed, and make the sound more pleasant.

Feed is the key

The surface finish is affected by the feed speed, and the production efficiency is also affected by the feed speed. If it is too fast, the tool will break easily, and if it is too slow, the efficiency will be low. Calculate based on the number of tool edges and the feed amount per tooth to find a balance point. Only in this way can the quality be guaranteed.

The depth of cut should be moderate

The size of the cutting force is determined by the amount of back cutting and side cutting. More cutting can be done during rough machining, while less cutting is required for finishing. Proper distribution of the margin can not only protect the machine tool spindle, but also ensure that the part size meets standard requirements.

Practice brings true knowledge

After completing the theoretical calculations, it is necessary to carry out computer verification work. Observe the color and sound of the iron filings, and fine-tune the parameters until they are perfect. By accumulating experience and building your own database, it will be much faster to process similar parts in the future.

Do you think that in CNC machining, is the rotation speed more important, or the feed speed? You are welcome to leave a message to start a discussion, and give a like to share so that more colleagues can benefit.