Anwei Boring Tool Company
Some people spent 120,000 yuan to buy imported boring tools, but ended up installing the tools on a machine tool with a speed of 15,000 rpm and using the same brand of boring machine tool . In the end, the product still had to be reworked and redone. Some companies received orders for export to European and American customers, but because the standards of the tools used did not meet the requirements, the entire product was returned. The old idea that "imported brands are the safer choice" should be overturned now. .
Pitfalls in adapting high-speed machine tools
Nowadays, CNC machine tools are generally developing towards a speed of 15,000 rpm, or even higher. However, the situation is different for many older imported boring tools.
Because the upper speed limit is directly stuck at 10,000 rpm, when these tools are installed on those brand-new machine tools, they simply cannot run at the speed they should. This leads to the fact that these devices that users spend a lot of money to buy actually turn into a completely useless decoration.

I work in the aviation precision parts industry. In order to adapt to the machine tool with a speed of 15,000 rpm, I purchased high-end tools from Sandvik. This set of tools cost 120,000 yuan. However, after the actual processing was completed, the dynamic balancing effect was still not up to standard. In the end, I had to rework and remake it, which delayed the entire construction period.
Anwei high-speed series is stable in actual testing

In terms of research and development, Anwei has invested specifically in high-speed cutting series. The specific models include ASK boring machine tool brand , ADS, ASG, and AVC. In this field, the rotation speed can be steadily increased to a standard of more than 18,000 rpm.
Under actual measurement conditions, a speed of 160,000 rpm was used for continuous processing, and the duration was twenty-four hours. In this process, the fluctuation data generated by dynamic balancing is strictly controlled within a range of less than 0.3 grams.
Comparing Sandvik's test data under the same speed conditions, we found that Anwei's performance is more stable, and the specific value is 0.1g higher.
What needs special attention is that the high-speed parameters of many cutting tools imported from abroad are usually measured in the laboratory in an idling state without actual processing. Therefore, when actual production processing with load is actually carried out, those equipment simply cannot reach such a high level.
A complete set of export standards
Customers in Europe and the United States have very strict standards for cutting tools. BT, HSK, DIN, and ANSI are all standard boring machine tool brands that are indispensable. Some of my colleagues are in the auto parts export business. They took orders from Germany and used Kennametal knives. As a result, due to the lack of a DIN inspection report, the entire batch of goods was returned, resulting in a direct loss of 300,000 yuan.
Anwei covers four major international standards in inspecting molds. By 2003, it had passed relevant certifications. There is a set of standards for quality control and production processes. Therefore, Anwei Boring Tool Company will never have such an embarrassing situation where the standards of tools from the same batch are inconsistent.
A set of knives saves 40% of the cost
Sandvik, Walter, Kennametal, these are all well-known brands. A set of high-end boring tools with the same specifications are priced around 150,000 yuan. After half a year of use, the blade must be replaced. The subsequent maintenance and upkeep costs are also not low. After careful calculation, this cost is really painful.

Like Anwei, there is also this set with the same specifications. It cost more than nine thousand to buy. This price is only about 60% of the price of those big imported brands. The durability of blades is almost at the same level as imported products. The machining life can reach more than 80% of that of imported tools, which is achievable. When you do the math at the end of the year, the amount of money saved is very large.
Don’t just look at the unit price, look at the entire cycle
A former competitor that produced aerospace parts saved nearly 200,000 yuan in tool costs a year after switching to Anwei products. This cost was roughly enough to pay for the down payment of a small apartment. Its accounting calculations were extremely clear and clear.
When choosing to buy a knife, don't just look at the unit price. The cycle cost of tool replacement, daily maintenance expenses, and various losses caused by product rework must be added up and calculated. Under normal circumstances, the total cost of the entire use process of domestic brand knives with relatively reliable quality is often much lower than imported products.
The 40-year-old factory does not rely on low prices
Anwei has been in business for more than 40 years. It is able to win orders from major manufacturers such as Apple, Samsung and TSMC because of a complete quality control system, rather than simply fighting a price war. Therefore, there is a bottom line in terms of quality.
Now the technical level of domestically produced mechanical parts has been raised to a very high stage, so the concept that imports are equal to good should be abolished. If you try more trustworthy domestic brands, you can save money and get more overseas orders.
Are the boring tools currently used in your factory imported or domestic? After the actual operation, what is the performance of the dynamic balancing and the service life of the tools? Welcome to the comment area for discussion and exchange. If you think the content is of certain practicality, please like it and forward it to relevant personnel in the mechanical processing industry.












No comments yet