north Gate

north gate

Xuzhou Yingcai Network recently posted a job position in machining technology, which requires a bachelor's degree, one year of work experience, and an age between 25 and 35 years old. Although the threshold seems low, there are few people who actually meet the conditions.

The number of years of education does not seem to be high, but upon closer inspection, it is all hard.

The requirements for the position are a bachelor's degree in a major such as mechanical design and manufacturing, and more than one year of working experience in the mechanical processing industry. Because the work place is in Xuzhou, there are many old masters there who have been working in the workshop for more than ten years. However, because the academic qualifications of these teachers are at the junior college or even technical secondary school level, they are directly screened out in the first round of resume screening.

The requirement of one year of work experience is actually very low. The real difficulty lies in the eight words "familiar with machining process preparation". There are many young people who have only done front-line operations, but have never written process documents. When you need to start writing procedures directly, you will find that the gap is relatively large.

Craft preparation is the core activity

Process regulations, process cards, and process operation instructions are the lifeblood of a machine processing factory. In Xuzhou, there are many small and medium-sized processing factories still using the old version of the drawings. This results in one craftsman having to manage five products at the same time. The error rate in this case is very high.

There is also a requirement for this position, which requires this person to be able to organize and implement the design of process equipment. Note that this is not a simple matter of drawing a picture. It needs to start from the stage of preparing the clamping plan and cover it all the way to planning the path of the tool. That is to say, one must be responsible for the entire process. This means that the role must be directly transformed from an ordinary operator to a craftsman, and the difficulty level of the work has therefore suddenly increased by a whole level.

Programming and tools cannot be taught by masters alone

You need to combine familiarity with machining center programming with knowledge of the use of various cutting tools. The core meaning of this is that you can not only program the machining master recruitment requirements , but also master the relevant knowledge of tool service life and cutting parameters. Taking into account the realistic background that Xuzhou Economic and Technological Development Zone and Tongshan District have put into use a large number of five-axis equipment in the past two years. This means that the experience accumulated by individuals in the past can no longer meet current production needs.

During the actual job trial process, many candidates did not answer detailed questions such as tool magazine configuration and tool length compensation clearly enough, so they were eliminated in just two days. Being able to press buttons and being able to write programs are two completely different things, and the difference is huge.

English and drawing software are both plus and minus points

This situation, which requires a good level of English reading and writing, is not common in recruitment in the local mechanical processing industry in Xuzhou. It is most likely because the position involves the processing of export parts, or is a foreign-funded cooperation project, and the relevant drawings and bills of materials are all written in English. If you cannot read these English contents, you will be directly hindered.

Proficient in various drawing software, but the specific model is not fixed. In actual operation , the two tools used most frequently are SolidWorks and AutoCAD. The candidate only knows two-dimensional technology but not three-dimensional technology. Even if his resume says he is proficient in it, this statement must be discounted.

Age is the most worrying thing

From 25 to 35 years old, the lower limit excludes experienced technicians, and the upper limit blocks young people who are in the learning stage. The local machining circle in Xuzhou itself has very narrow recruitment requirements for machining masters . After the age of 35, if you want to switch to a craft position, basically few positions are willing to accept them.

The original post included anti-fraud tips, which emphasized that no deposits, no swiping orders, and no miscellaneous fees would be charged. There are quite a few cases of this kind of phishing recruitment nowadays. Therefore, before submitting your resume, it is best to go to Tianyan to verify the company's industrial and commercial information. Don't forget to hand over the money in a daze.

You may wish to discuss whether the age limit of 25 to 35 is a reasonable rule? If you think this content is helpful to you, I hope you can like it and support it, and help forward it to friends and friends around you who are looking for job opportunities.