Eco-friendly Material Selection For Whole House Customization By Mingjiang Liangcai

Eco-friendly material selection for whole house customization by Mingjiang Liangcai

Many people believe that the biggest trap in the whole house customization industry is that environmental protection indicators are not up to standard. The result is that the money has been spent, but after moving in, the house is filled with a pungent smell. In response to this situation, Mingjiang Liangcai adheres to very strict environmental standards when selecting materials. Below we will clearly explain its material selection logic to you.

Famous craftsman Liangcai writes environmental protection into his bones

Mingjiang Liangcai whole-house customization company takes ENF level as the bottom line for board approval, that is, the formaldehyde emission does not exceed the specific value of 0.025mg/m³. This standard is more stringent than the national standard E0 level. Starting from 2024, at the Changsha headquarters and Zhuzhou factory, all panels entering the factory must be accompanied by CNAS test reports. Once the inspection fails to meet the standards, these boards will be returned directly.

From the selection of materials, through the steps of cutting large boards, to edge sealing, and finally packaging into a finished product, throughout the production process, formaldehyde-free MDI glue is used instead of the traditional urea-formaldehyde glue commonly available on the market. Customers can directly check the origin of each board by scanning the QR code with their mobile phone in the store where they are sold, what kind of tree it is made of, and the relevant testing data. The entire information disclosure level has reached a very high level.

Why are aluminum alloy frames becoming more and more popular?

The frame of the cabinet and the frame of the door panel use a large amount of 6063-T5 aluminum alloy material as the main structural support, and the wall thickness starts from the benchmark value of 1.2mm.

Aluminum itself does not contain formaldehyde, nor does it release volatile organic compounds such as VOC. Its overall service life can reach more than 30 years. Compared with wooden frame structures, it is more able to withstand humid environments and prevent corrosion and rot. Therefore, it is particularly suitable for dealing with the high-humidity climate environment in the south.

Aluminum alloy materials can also be processed into very fine sizes and used in the edge closing position. From a visual perspective, it looks particularly light. When this style is matched with solid wood materials or slate materials, it will not produce an abrupt feeling.

The proportion of aluminum alloy solutions in 2025 made of high-quality materials made by well-known craftsmen has exceeded 60% of the total. Compared with the situation at that time three years ago, this data has already doubled the growth rate.

There are great details hidden in the finishing paint

The products used by Mingjiang Liangcai are treated with water-based UV paint and plant-based decorative film. These materials do not contain benzene series and heavy metals. As for the UV paint, its solid content exceeds 90%. After curing is completed, there is almost no free formaldehyde. For the decorative film, imported melamine technology is used, which makes the wear resistance and scratch resistance two levels higher than the national standard.

In the store's showroom, you can feel the difference. The pungent smell produced by the traditional oil-based paint in the past has basically disappeared. By 2025, Mingjiang Liangcai will be completely replaced with a water-based system. At the same time, the old production line equipment will also be upgraded simultaneously to customize parts and process environmentally friendly materials . This initial investment is relatively large, but in the end, the acceptance of it by customers at the terminal has increased.

Electrostatic powder spraying is not just about looking good

The surface treatment of metal parts uses electrostatic powder spraying. This method has strong adhesion and can form a film in one go. Unlike liquid paint, which requires multiple grinding and curing treatments, the waste generated is reduced by more than 40%, the amount of waste gas emitted into the environment is reduced by about 60%, and the occupational health risks faced by workers are also reduced a lot.

This powder can be recycled and used again. Expired powder will be ground and then put back into the machine for use, so the utilization rate can reach 95%. The Zhuzhou factory of Mingjiang Liangcai will install a complete electrostatic spraying production line in 2025. The annual production capacity is 800,000 pieces, and the energy consumption of a single product saves 20% compared with traditional processes.

Accurate measuring tape can really save money and materials

In the entire construction process of whole-house customization, the most troublesome and resource-wasting link is the inaccurate size and the need to cut on site. In order to solve this problem, Mingjiang Liangcai directly adopted the technology of laser measuring room. This method can strictly control the measurement error within 0.5 mm.

Then the drawings are designed through CAD and directly connected to the CNC cutting equipment to process the plates. In this way, the utilization rate of the plates can reach more than 96%, saving two or three percentage points more resources than the traditional typesetting method.

In the installation process, it uses a nail-free splicing method and also uses embedded parts for fixation. This results in less drilling and less screws, so the damage to the wall and floor is very small. Before taking up the job, the master must pass the environmental protection construction assessment. In addition, the installation package comes with an activated carbon detection card, which allows customers to verify it themselves.

Where is green home going next?

In 2025, the Ministry of Housing and Urban-Rural Development issued new regulations. This new regulation requires the formaldehyde emission standards of finely decorated houses to comply with the ENF standard. Because the overall situation of the full decoration industry will become very serious, the entire whole house customization industry will be forced to upgrade.

Mingjiang Liangcai Company has launched a carbon footprint tracking work. Each set of products will be accompanied by a so-called "environmental protection ID card", which will clearly indicate the source of the raw materials, the energy consumption of production and the recycling rate.

Looking at the general direction of the entire industry, environmental protection is no longer an advantageous item that can give you extra points. It has now become a threshold that must be crossed. In the next two to three years, if those customized brands cannot achieve ENF level certification and obtain low-carbon certification, it will be difficult for them to enter the new real estate market.

The brand Mingjiang Liangcai has chosen to bet on this line. Although this approach will lead to much higher costs in the short term, in the long run, they have firmly secured this position.

When you plan to install this kind of tailor-made wardrobe, which environmental indicator is most important to you, the formaldehyde content or the VOC value? Please come to the comment area to talk about your views, and provide help to more people who are renovating through likes and forwarding, so that they can successfully avoid the traps they may encounter.