Detailed Knowledge Of Shenzhen Grinding Fluid

Detailed knowledge of Shenzhen grinding fluid

When the boring process is handed over to external collaboration, many manufacturers complain that the tool wears out too quickly and the surface quality of the workpiece is unstable. If you can choose the right grinding fluid, all these problems can be solved smoothly.

Four core functions of grinding fluid

In metal processing, grinding fluid plays four roles, namely lubrication, cooling, cleaning, and rust prevention. These four functions cooperate with each other, without any one of them, and they also directly affect the processing quality and efficiency.

Good lubrication performance can reduce the friction between the tool and the workpiece and reduce the temperature generated during cutting. The role of cleaning can remove chips and oil stains in time to avoid scratches on the surface of the workpiece.

Suitable for a variety of metal processing processes

This grinding fluid for machining is suitable for stainless steel, alloy steel, ferrous metals, and various non-ferrous metals such as copper and aluminum. It can handle turning, drilling, milling, grinding, tapping, and gear hobbing.

Various complex processes also have corresponding applicability to machining centers. Different metal materials have different cutting characteristics. A grinding fluid with good performance must be able to take into account the processing requirements of multiple materials at the same time.

Extend tool life

Grinding fluid has outstanding lubrication and anti-wear properties, which can effectively protect the tool and significantly extend the service life of the tool. In terms of service life, tool cost is a key expenditure in machining. Saving tools is equivalent to cost. Saving tools means saving costs. It is cost saving.

At the same time, it can also improve machining accuracy and improve surface finish, thereby reducing the need for subsequent rework. Products with high-efficiency and energy-saving characteristics will help reduce overall production costs for factories and improve market competitiveness.

Affordable choice

The grinding fluid can be used after being diluted ten to twenty times, and its dosage is very economical. This product has good stability, is not prone to corruption, has a long service life, and has a relatively low overall cost.

It has high transparency, which is conducive to observing the processing status of the workpiece. It has excellent hard water resistance and strong adaptability to water quality, and the use effect will not be affected due to water quality problems.

Proper preparation and use

When preparing the working fluid, you should choose fresh water quality Shenzhen grinding fluid and dilute it according to the proportion. When replenishing the working fluid, it needs to be replenished at a higher concentration to prevent the lubrication and anti-rust performance from declining.

After the machine stops operating, the cutting fluid installed on the machine tool should be cleaned immediately and oiled to prevent rust. If the workpiece needs to be stored for a long time, it is recommended to carry out additional anti-rust treatment for poor quality materials.

Precautions for safe use

Grinding fluid is absolutely forbidden to be eaten, 和 it needs to be kept clean at all times during its configuration and use. Be sure not to mix metal chips, engine oil, lint and other debris into it, otherwise it will affect its performance.

In heavy-load and difficult-to-cut situations, extreme pressure anti-wear agents can be used to improve the lubrication and cooling effect. Never use working fluid to wash hands or rags, and pay attention to safe operation.

What kind of grinding fluid-related problems have you encountered when outsourcing boring processing? Leave your words in the comment area to share them happily and enthusiastically!