Precautions For Feeding Jaw Crusher

Precautions for feeding jaw crusher

Strictly control material specifications

Materials must meet standards, which is a prerequisite for the equipment to operate. When crushing marble, the particle size is strictly prohibited from exceeding a certain limit, and the humidity content needs to be controlled within the range of 15. If the standard is higher than this, it will be extremely easy to cause the feed inlet to become clogged and the material to stick, which will affect efficiency. For iron ore, the maximum size of the feed must be less than 85% of the feed opening width. Such an indicator with strict requirements can effectively avoid material jamming and effectively ensure the smooth operation of the production line.

Standardize start-stop operation procedures

First of all, after starting the machine, try running it without load for ten minutes. During these ten minutes, focus on checking whether the status of the feed inlet is normal. Only after confirming that there are no errors can you start feeding into the machine. The shutdown process is also very important. You must first stop feeding into the machine and wait until all the materials in the crushing bin are emptied before you can turn off the power of the machine. Such a standardized operation procedure can extend the service life of the equipment. Avoid mechanical damage caused by improper operation.

Keep feeding uniform and stable

When feeding on site, the speed must be kept consistent! If the speed is suddenly fast and sometimes slow, it will cause the load to fluctuate violently, which will interfere with the normal operation of the equipment! Stable feeding speed can not only improve the crushing effect, but also improve the working environment of the workshop! For the sand making machine, uniform material flow helps to take advantage of its large capacity and high efficiency! This is not only an operational requirement, but also a key measure to save energy and reduce consumption!

Strictly prevent the hazards of foreign matter mixing

Core components such as bearings are most afraid of hard foreign objects, metal blocks or unbreakable debris. Once they enter the crushing chamber, the consequences will be unimaginable. The manufacturer particularly emphasizes that screening must be done, because these foreign objects will seriously damage the bearings and accessories, which will lead to high maintenance costs. Regular cleaning of impurities in raw materials is the most basic means of protecting the internal structural integrity of the equipment, and this cannot be ignored.

Pay attention to reinforcement of worn parts

Long-term crushing operations will cause wear and tear on the discharge port. Using riveting and welding reinforcement technology, this part can be effectively repaired and strengthened. This method of treatment is relatively low cost and can significantly restore device performance. Combined with the low power consumption and low wear characteristics of the sand making machine, regular maintenance work can keep the equipment in optimal condition. This not only increases production efficiency, but also extends the service life of the entire machine, which is worth investing in.

Adapt to market demand development

In view of the accelerated pace of infrastructure and mining development, the demand for crushing equipment has increased significantly. The sand making machine we own is suitable for a variety of materials such as limestone, coal gangue, etc. It has many advantages such as good sealing, stable operation, and easy maintenance. It closely follows the rhythm of urban development and optimizes equipment performance, so that it can meet the needs of more industries. Choosing efficient and energy-saving crushing solutions can bring more considerable economic benefits to enterprises, thereby promoting industry progress.

In your daily operation process, have you ever encountered a situation where the feed is blocked? You are welcome to leave a message to share your solutions and experiences.