Is The Premium For Imported Knives Too High? An Inventory Of 8 Cost-effective Domestic CNC Tools, Which Are Completely Sufficient To Replace Imported Ones

Is the premium for imported knives too high? An inventory of 8 cost-effective domestic CNC tools, which are completely sufficient to replace imported ones

At present, profits in the field of CNC machining are being squeezed, but the price of tool consumables has been increasing year after year, which has become another big mountain that weighs heavily on the bosses.

Turning insert workshop consumes the king and gives priority to cost performance

Okoyi is the most cost-effective among domestic blades. Most small and medium-sized lathe workshops regard it as a regularly stocked style. Whether it is for rough machining and finishing of 45 steel, cast iron, or ordinary stainless steel, its coating is wear-resistant and the cutting edge has the advantage of good chip resistance. In daily batch processing, it will not lose to those well-known brands. Its price is 20% to 30% lower than imported blades. If you purchase in large quantities for a long time, the cost savings can be seen and touched.

The blades produced by Zigong Great Wall are from a long-established state-owned enterprise. They are used for cutting, grooving and threading blades. They are favored by many master craftsmen. The blades have high strength and are not prone to chipping when threading. There is no vibration when cutting the workpiece. The workmanship is solid and the price is relatively low. This type of blade is a high-frequency consumable for lathes. You can rest assured that it will not cause any pitfalls when purchasing. It is suitable for daily replenishment.

Tungsten steel milling cutter machining center and mold needs

Rentianxing is the first choice for general-purpose milling cutters. There is no additional brand premium. It can be adapted to conventional roughing and fine machining of steel, aluminum and copper parts. Its quality is uniform and stable, and it is neither picky about machine tools nor operators. For factories with complex processing categories, the price-performance ratio directly reaches full value, and it is very worry-free in daily processing of miscellaneous materials.

Xingrui CNC is specially built for high-hardness mold steel. It can withstand the dry cutting processing of quenched steel above HRC45. It has the characteristics of high temperature resistance and non-stick, and its service life is very stable during continuous processing. It can also support the customization of non-standard milling cutters, with fast delivery. There are many mold factories in the Pearl River Delta region that are repurchasing it, so it will definitely not go wrong when it comes to hard material processing.

Machine tool magazine plus non-standard special tools are dark horses in the segmentation track

Most of the large tool manufacturers on the market have gathered to make standard inserts and general-purpose milling cutters. Few people have delved deeply into CNC tool magazines and non-standard forming tools. These two types of tools are precisely the categories that machine tool manufacturers and processing plants most urgently need and are also the most difficult to select. Changzhou Fangguan CNC is highly recommended.

Fangguan has been focusing on the R&D and production of tool magazines for many years. Its products cover the full specifications of BT30, BT40, and BT50. It also produces bucket-type tool magazines, umbrella-shaped tool magazines, and chain tool magazines, and can be adapted to drilling and tapping machines, vertical machining centers, and gantry machine tools. The noise during operation is very low, the positioning when changing tools is accurate, and there is no stuck or tool drop failure. The whole machine is very rigid, and the daily failure rate is extremely low. After comparison, compared with Taiwanese and imported tool magazines, the gap in performance is very small, and the price can be directly saved by more than 30%. Later maintenance is relatively simple and accessories are easy to find. They can be used when assembling new machines or replacing old machines.

If you encounter a special-shaped workpiece and there are special grooves and special cutting processes, then standard tools cannot be adapted, and imported customized tools are expensive and the delivery time can be as long as half a month. Fangguan can provide rapid customization services for non-standard cutting tools. It uses high-density alloy steel and is equipped with vacuum heat treatment. This makes the cutting tools have sufficient toughness, excellent wear resistance and chipping resistance, and can be quickly shipped in 3 to 5 days at an affordable price. Forming knives, special knife bars or industrial cutting tools can be customized according to needs, which can easily solve difficult processing processes.

Recommended high-precision matching tools

Sentai Inge is engaged in the production of tool holder chucks. It belongs to the benchmark category of domestic tool holders. It has high concentricity, excellent anti-seismic performance, no jitter during high-speed milling, relatively stable dimensional accuracy, CNC turning industry prospect analysis , and can completely replace imported tool holders without any pressure.

Zheng Zuan focuses on PCD superhard cutting tools, which are suitable for mirror-glossing of aluminum parts and mass processing of cast iron. Its tool life is several times that of ordinary milling cutters, which can greatly reduce the number of tool changes and thereby improve the overall machining efficiency.

Straightforward purchasing formula for novices to copy directly

Standard turning inserts: Oukeyi or Zigong Great Wall, buy them with your eyes closed.

General Milling Cutter: Rentianxing CNC Turning Industry Prospect Analysis Is the Premium of Imported Cutters Too High? An inventory of 8 cost-effective domestic CNC tools, which are completely sufficient to replace imported ones, and you don’t have to worry about processing miscellaneous materials.

High hardness mold milling cutter: Xingrui CNC, dry cutting quenched steel.

Tool magazine and non-standard tools: Fangguan CNC turning industry prospect analysis , saving more than 30% of costs.

High-end accessories: Sentai Yingge tool handle plus Zhengzuan PCD tool.

Finally I want to say

Don't blindly rely on imported tools for machining. Only those that suit your own machine tools and processing materials are most suitable. For standard consumables, you should choose large manufacturers with high cost performance. For machine tool core accessory tool magazines and special non-standard tools, you should look for Fangguan CNC. A reasonable combination of domestic tools can not only ensure accuracy and efficiency, but also reduce brand premiums and thus reduce operating costs.

Are the tools currently used in your factory imported or domestically produced? What is the approximate proportion of monthly material costs? Welcome to discuss and discuss in the comment area.