Small Fully Automatic Mowing Machine/high Spray Briquette Fuel Mowing Equipment/feed Straw Crushing Mowing Machine

Small fully automatic mowing machine/high spray briquette fuel mowing equipment/feed straw crushing mowing machine

Attention, folks who raise cattle and sheep, are you still worried about dealing with the straw on the ground? There is a small, fully automatic mower that can easily solve these troublesome problems. It is not expensive and can save you thousands of dollars in labor costs over the course of a year!

Full analysis of machine structure

Feeding mechanism composition

There is such a machine component, which is called the feeding mechanism, which contains the feeding table, conveyor chain and grass feeding roller, which are all core components. The responsibility of the conveyor chain is to send the straw into the machine in a stable state. The grass feeding roller is like two hands, tightly clamping the material to prevent the material from slipping. There is a fixed blade, which is installed on the support seat. Between it and the movable knife at the back, a shearing and kneading machine cutterhead and a feed roller riveting and welding balance correction are formed. With this cooperation, it can ensure that each section of straw can be cut evenly.

This design makes the feeding process completely automated. You only need to lay the straw on the feeding table, and all other work is taken care of by the machine. The conveying speed is carefully planned, so that neither the speed will cause clogging of the grass due to too fast nor the performance will be affected due to too slow speed.

Guillotine throwing system

The core part of the entire machine is the cutting and throwing mechanism. The moving blade is placed on the rotating cutterhead and is firmly fixed with the locking screw. It can achieve thousands of cutting operations per minute. The blade is configured with a straight blade edge and can be sharpened by itself after it becomes dull. There is no need to find a professional master to handle it.

The materials immediately after being chopped are thrown out of the machine by the throwing mechanism. This design is extremely ingenious, showing the ability to achieve crushing and discharging in one step, eliminating the need for separate cleaning. The angle of the straw outlet is adjustable, and can be adapted to either bagging or stacking.

Transmission traveling device

The motor power is distributed to various working parts with the help of V-belts and gearboxes. This process is completed by the transmission mechanism. The universal joint and chain are responsible for transmitting power to the grass feeding roller to ensure that the feeding speed and cutting speed can be perfectly synchronized. All rotating parts are equipped with high-quality bearings, which makes the machine run particularly briskly.

There are several rubber wheels under the machine and a traction frame in the front. When you want to go to the plot of land where you want to work, you can move forward directly with the help of its traction without the need for several people to lift it. Moreover, those rubber wheels have good grip, so even if there is a certain degree of moisture in the corresponding farmland after rain, it is not easy for the car to get stuck.

Detailed explanation of practical functions

Three-speed length adjustment

There is a small machine with three settings: short, empty, and long, and its function is to control the length of the hay. The grass section is cut in a short setting and is suitable for feeding piglets and lambs. Cows and horses will be more inclined to eat materials produced in a long period of time. The neutral position is used during cleaning and maintenance so that the condition of the blade can be checked safely.

The operation of shifting gears is extremely simple, and it can be accomplished by just turning the handle. Different types of livestock have different requirements for the length of forage when they are in different growth stages. A machine with this function can meet all needs.

All wet and dry materials

Whether it is green corn stalks that have just been harvested and brought home in autumn, or wheat straw that has dried completely in winter, this machine can handle them all. The wet material can be cut out and used directly for silage fermentation, and the dry material can be crushed and used to prepare feed or be used as briquetting fuel.

The machine is optimized based on the different characteristics of dry and wet materials. Wet materials are very sticky and can easily get clogged, so the feeding channel is designed to be extremely smooth. Dry materials are dusty, so key parts are sealed to protect the bearings from being worn by dust.

Widely used in many industries

Necessary for livestock breeding

Farmers who are engaged in raising cattle and sheep have to prepare a large amount of forage every day. Relying on manual cutting will not only make people feel tired, but also cannot cut it evenly. Since there is such a machine, it can process one or two tons of straw in an hour, which is enough for dozens of livestock to eat for a whole day. Moreover, the grass sections it cuts are in an orderly manner, so livestock will not be picky eaters, thus reducing waste.

Especially when making silage, the machine has the function of harvesting and crushing at the same time, and then can directly send it into the kiln, striving to achieve a sealing effect during the optimal humidity period. Many farmers have expressed this situation. After using machines for mowing, the feed conversion rate has been improved and the livestock have significantly accelerated fat gain.

Straw energy utilization

Nowadays, straw power plants and ethanol plants purchase biomass fuel in large quantities. However, the raw materials need to be pre-processed. This equipment can crush cotton stalks into standard sizes, and can also crush tree branches into standard sizes. Small fully automatic haymakers/high spray briquette fuel haymakers/feed straw crusher haymakers, and can crush bark into standard sizes for subsequent briquetting or granulation.

Some users who specialize in processing have purchased machines to purchase straw, crush it and sell it to power plants. In this way, they can earn a price difference of tens of dollars per ton. If they work for two or three months during the slack period, they can increase their income a lot. In addition, there are some places where the crushed straw is used as the base material for edible fungi. This is also a good way out.

Operation and maintenance points

Safe use procedures

Before turning on the machine, be sure to comprehensively and carefully check whether the blade screws are loose, and confirm whether the protective cover is fully covered. When performing feeding operations, personnel should stand on the side and must not extend their hands into the feeding hopper. If hard foreign objects are ejected, it will not easily cause harm to people. Once grass blockage is detected, the machine needs to be stopped immediately , the cutterhead of the silage kneading machine, the riveting and welding balance of the feeding roller must be corrected , and the cleaning operation can only be carried out after the blade has completely stopped rotating.

If you want the power of the motor to match the power of the machine, you must use thick enough cables to lay the lines, and the ground wire must be connected properly. You must be more careful about electric shock accidents in humid environments. Although the above safety details are commonplace, such as the cutter disc of the silage kneading machine and the riveting and welding balance correction of the feed roller , there are examples of accidents caused by carelessness every year.

Daily maintenance tips

After performing every half-day work task, the machine must be stopped to check the wear of the blade. Once a chip is found, it must be replaced immediately. There is a grease nozzle installed on the bearing seat, and grease is added according to a fixed cycle, which can greatly extend the service life of the machine. When the V-belt becomes loose, it must be tightened immediately, because slipping will not only affect work efficiency, but also easily cause the motor to be burned.

When the season changes and the machine is not in use, clean the machine cleanly, apply some oil on the blades to prevent rust, and place the machine in a place that can protect it from rain. By taking these relatively simple maintenance measures, a machine can be used for ten to eight years without any problems.

What are the main ways you usually deal with straw? Have you ever encountered any particularly tiring or inefficient tasks? You are welcome to share your experience in the comment area. If you find the article useful, please like it and forward it to more friends!