The selection of stainless steel materials is mainly considered from the following five aspects. 1. In terms of mechanical properties of stainless steel screw materials

Yhä useammat kolmiulotteiset monimutkaiset osat on otettava käyttöön moniasemainen muotoilutekniikka, eli hienossa leikkausprosessissa progressiivisen kuolevan (moniasemainen muoto) kautta....

Carbide milling cutters are milling cutters made from metal carbide micron-sized powders such as tungsten carbide (WC) and titanium carbide (TiC) as the matrix, cobalt (Co), nickel...

To minimize the cost of producing CNC machined parts, the part complexity, size and surface treatment requirements, and materials used need to be considered. Always keep in mind th...

Detailed explanation of wire cutting principles and processing steps Wire cutting is an unconventional processing technology, mainly used to cut hard materials, such as hardened to...

Industrial CT non-destructive testing is an advanced non-destructive testing method that uses computed tomography technology to detect the internal structure and defects of industr...

[Original from Tiejia.com] Cracking of the large and small arms of excavators is a problem encountered by many excavators, because as the main working part of the excavator, basica...

Machine Tools | Compound Machining Machine Tools | Direct Drive Technology

Section 7 Determination of Processing Allowance After the process route is drawn up, the process content, processing dimensions and tolerances of each process need to be determined...

Case: A stainless steel blade is difficult to polish manually due to its thread structure. After electrolytic polishing, the surface brightness is increased by 90%, and the blind h...